Viking
|
VIKK1700IPEWP
Viking K-1700-IP-EWP VoIP Stainless Steel Entry Phone
The K-1700-IP-EWP entry system provides a tough and attractive hands-free phone for apartment and residential door entry, or applications requiring a vandal resistant VoIP speaker phone. The K-1700-IP-EWP is designed to provide quick and reliable hands-free communication for SIP VoIP phone systems with PoE. The K-1700-IP-EWP can be programmed from any PC on the same LAN or remotely using a Static IP Address. The K-1700-IP-EWP can dial up to 250 programmable numbers and another 250 rollover numbers.
Key Features:
- Mfr. Part #: K-1700-IP-EWP
- 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics
- Stainless steel “Call” button
- Heavy duty metal keypad
- T-10 Torx security mounting screws
- Enhanced Weather Protection designed to meet IP66 Ingress Protection Rating (see DOD 859)
- Marine grade 316 stainless steel faceplate, screws and push button switch
- Switch internally sealed per IP67
- Mylar speaker
- Self-draining mic mount
- Faceplate, mic and speaker gaskets
- Two sets of SPDT 2 Amp relay contacts for door / gate or camera control
- Secure Remote Relay Control using Viking RC-4A (DOD 585)
- Blue “Call / Status” LED indicator
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 2,<6.5 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for “Push to Talk” mode
- 26 Bit Wiegand input for adding a Viking proximity card reader
- 26 Bit Wiegand output can connect to card reader input of an Access Control System
- Programmable to speed dial up to 250 numbers
- Cycles to roll over phone number on busy or ring-no-answer
- Program up to 1,000 keyless entry codes
- Program up to 1,000 proximity card numbers
- Key-less entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
- Call logging with time and date stamp
- Hangs up on busy signal, time-out or touch tone command
- Extended temperature range (-40°F to 140°F)
- Volume adjustments for microphone and speaker
- Selectable auto-answer feature for monitoring
- Remotely programmable
- Network downloadable firmware
- Self diagnostics for testing com, mic, speaker, and switch
- Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
- Flush mount using the included rough-in box or surface mount using a Viking VE-6×7 Surface Mount Box (DOD 424)
Special Order/Lead Time required
Recently Viewed
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.