Viking E-20-IP-EWP Surface Mount Plastic VoIP Entry Phone with EWP

The E-20-IP-EWP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-20-IP-EWP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The entry phone can dial up to 5 programmable numbers.

The E-20-IP-EWP door entry phone will flash the "Call" LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.

For outdoor installations where the unit is exposed to precipitation or condensation, model E-20-IP-EWP is equipped with Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards.

Key Features:

• Mfr Part #: E-20-IP-EWP
• Self diagnostic reports via email (testing com, mic, speaker & switch)
• Automatic polling and programming software included
• 2 amp relay contacts for door/gate or SL-2 strobe light control
• SIP compatible
• PoE powered (class 1, <4 watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
• VoIP eliminates the need for "Push to Talk" mode
• Network downloadable firmware
• Handsfree operation
• Programmable to dial up to 5 numbers on busy or ring no answer
• Cycles through backup phone numbers on busy or no answer
• Enhanced Weather Protection (EWP), designed to meet IP66 rating
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range (-30°F to 130°F)
• 3 different chassis or board only available
• Volume adjustments for microphone and speaker
• Optional PB-100 polling system available
• Optional SL-2 or BL-4-EWP strobe light kit available