Viking
|
VIKDLE200B
Viking DLE-200B Two-Way Line Emulator
Viking Two-Way Line Emulator Allows 2-way communication between analog equipment with a cost effective, easy to use method of conducting on-site demonstrations. When either device goes "off hook" the other rings until answered.
Applications:
- Dedicated point-to-point communications (ringdown circuits)
- Program Telecom products without a phone line
- Connecting dictation equipment to Electronic Key Systems
- Intersystem TIE line
- Courtesy phones
- Demonstrating telecom equipment at trade shows, meetings, etc.
- Connecting modems together
- Prison phone communications
- Programming PC based voice products
- Replacement for Proctor Model #46220 and Proctor Model #46240 (requires 4 DLE-200B's)
Features:
- Compatible with fax machines and modem speeds up to 28.8 kbps
- Precise dial tone 32VDC talk battery
- Switch selectable ring cadence
- Provides CPC breaks after hang-up on either port
- Switch selectable audio attenuation
- Provides 2 seconds of precise dial tone after off-hook
- Provides ring back signal to calling device
- One or two way ring down capability
- Jumper selectable ring count
- Ring down and dial tone off mode (ideal for prison phone communications, etc.)
Specifications:
- Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided Power Supply
- Current Draw: 600mA maximum
- Dimensions: 120mm x 70mm x 35mm (4.75" x 2.75" x 1.38")
- Shipping Weight: .72 kg (1.59 lbs)
- Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
- Ringer Output: 2.0 REN load
- Loop Length: 4.2 km (2.6 mi) maximum - 24 AWG twisted pair
- Dial Tone Level: -20dBm with 600 ohm load
- CPC Break Time: 2 seconds or 150 msec (selectable)
- Maximum Data Speed: 28,800 bps
- Connections: (2) RJ11 jacks
Recently Viewed
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.