Viking
|
VIKACA1A
Viking ACA-1A Automated Call Attendant
Viking Automated Call Attendant The VK-ACA-1A answers on the first ring and provides a greeting and directory of up to 10 departments which can be reached by touching a single digit. The announcement can be interrupted any time. Works great on Panasonic 308, 616 and 1232. 1 Port unit. Stack as many units as you need for higher trunk capacity.
Applications:
- Increase call capacity without adding staff
- Operator back-up during high-traffic hours.
- Use as the first level of a multi-level announcer with additional ACA-1A's.
- Compatible with many phone systems.
Key Features:
- Non-volatile E2 memory - no batteries required for memory retention during power failures.
- Remote or local recording.
- Bilingual capabilities - allows menu selection in two languages.
- Programmable ring delay.
- Professionally greets and processes calls.
- Compatible with Centrex, PBX, Hybrid Key and many electronic key systems with OPX or single line station capabilities.
- Stores up to (9) 16 digit speed dial numbers and (1) 32 digit number.
- Processes approximately four calls per minute (stack as many units as necessary for larger capacity).
- Record announcements with a standard carbon handset or tape player.
- Separate announcements for greeting/menu selection, confirmation and busy extension.
- Blocks 8+ and 9+ dialing Touch Tone interruptible announcement.
- Default speed dial position for non Touch Tone phones.
- CPC detection.
Specifications:
- Power: 120V AC/12V DC 500mA, UL listed adapter provided.
- Shipping Weight: 1.0 Kg (2.2 lbs.)
- Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
- Hook Switch Flash: 512 ms ± 50 milliseconds
- Busy Detect Cadence: 200ms - 300ms or 450ms - 550ms on/off
- Speed Dial Timing: 120ms on/off (typical) - normal, 60ms on/off (typical) - fast
- Answer Message Default Time-out: 6 seconds
- Busy Message Default Time-out: 2.5 seconds
- Message Length: 1 minute
- Sampling Rate: 64K (equivalent)
- Connections: (1) RJ11 jack, (1) 3.5mm (1/8") tape jack, (1) modular handset jack
Special Order/Lead Time required
Recently Viewed
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.