Viking FXI-1A FXO/FXS Smart Paging Adapter

Viking’s FXI-1 universal paging interface allows you to provide paging from virtually any type of phone system instead of from a microphone. You can also provide background music and electronic night bell over the audio system.

Key Features:

• Mfr. Part #: FXI-1A
• Viking universal paging interface
• Select: FXO (loop start), FXS (ring trip) or paging port (VOX relay) interface mode
• No power supply required in FXS interface mode
• Up to 6 units can be powered from one adapter in the FXO or VOX mode
• 30V DC talk battery for interfacing with FXO or unused phone system line input/trunk port
• Floating 600 ohm paging output with volume control
• Normally open or closed relay for external paging amp activation or interfacing the paging amp with an external background music source
• 800 Hz pre-announce page tone (on/off)
• Compatible with 24 to 48 volt FXS operation
• Calling party control (CPC) detection for immediate disconnect
• Busy signal detect disconnect
• 2.5 to 5 second VOX silence disconnect timer
• Programmable VOX trigger sensitivity
• 16 or 36 second default disconnect timer
• Screw terminal block connections
• Wall mount housing: (2) #6x3/4 panhead screws included
• Power: 12-24V DC @ 100mA, 120V AC/12V DC @ 500mA, UL listed adapter included (not required in FXS mode)
• Dimensions: 111mm x 76mm x 36mm (4.38" x 2.97" x 1.38")
• Shipping Weight: .48 kg (1.06 lbs)
• Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
• Relay Contacts: 30V DC@1A, 110V DC@0.3A, 125V AC@0.5A
• VOX Minimum Audio Signal to Activate Relay: -30dbm minimum / -26dbm minimum @ 1KHz with VOX sensitivity switch at normal / lower positions
• VOX Time Out Disconnect: 2.5 or 5 second
• Default Time Out Disconnect: 16 or 36 seconds
• Talk Battery: 30V DC