Key Features: 3Com 3102B Phone Stand Condition: Refurbished

Key Features: 3Com 3502 Phone Stand Condition: Refurbished

Key Features: 3Com NBX/VCX 3102A Phone Stand Condition: Refurbished

Key Features: Mfr. Part#: 8400006 Allworx power supply for Allworx phones

Key Features: Mfr. Part #: 700383375 Wall Mount Allows you to mount phone vertically Compatible with 9500 series phones, as well as the 9608, 9611 and 9620 phones.

Key Features: Mfr. Part #: 700503110 The Avaya D160 Battery is an additional battery made for the Avaya D160 SIP DECT Handset

Key Features: Mfr. Part #: 700503111 The Avaya D160 Belt Clip is for use with the Avaya D160 SIP DECT Handset

Key Features: Mfr. Part #: 700513447 Replacement Stand Compatible with Avaya J129 IP Phone

Key Features: Mfr. Part #: 700513631 Wall Mount Kit with 1 foot Cat5e Cable Compatible with Avaya J169/J179

Key Features: Mfr. Part #: 700513632 IP Phone Stand Compatible with Avaya J169/J179

North American Power cord for Cisco 7900 series IP phone power cube.

The Cisco Unified IP Phone Expansion Module 7914 extends the capabilities of the Cisco Unified IP Phones 7960G 7961G 7970G and 7971G-GE with additional buttons and an LCD display. With this...

The Cisco Unified IP Phone Expansion Module 7914 extends the capabilities of the Cisco Unified IP Phones 7960G 7961G 7970G and 7971G-GE with additional buttons and an LCD display. With this...

Key Features: Mfr. Part #: CP-8800-FS, IMVV4222/US Cisco 8800 Series Stand Compatibility: Cisco 8811 IP Phone Cisco 8841 IP Phone Cisco 8851 IP Phone Cisco 8861 IP Phone

Key Features: Mnfr. Part #: CP-DSKCH-8821= Charging Capability: Yes Device Supported: IP Phone Compatible Cisco IP Phones: 8821, 8821-EX

Key Features: Mfr. Part #: SPA500DS-STAND Cisco Attendant Console Stand

The Cisco® SPA 500S Expansion Module (Figure 1) is part of the Cisco Small Business Pro Series and designed for use with the Cisco SPA 500 Series IP Phones. It is...

Key Features: Mfr. Part #: SPA504GFACEPLATE Compatibility: SPA504G

Key Features: Mfr. Part #: SPA525GFACEPLATE Cisco Faceplate for SPA525G Phone Compatibility: SPA525G SPA525G

Key Features: Mfr. Part #: SPA940-STAND Cisco Stand for SPA940 Series Phone Compatibility: Cisco SPA 940 Series Cisco SPA 960 Series

Key Features: Mfr. Part #: STAND-16100 Cisco Stand for 7000 Series Compatibility: 7905 7906 7911 7912

The Digium 1TELA001LF is a 12v power supply which is an optional accessory for Digium IP Phones. All Digium IP Phones are PoE but if you don't have a PoE switch...

Key Features: Mnfr. Part #: 1TELD002LF Digium D50 IP Phone Wall Mount Kit

Key Features: Mnfr. Part #: 1TELD003LF Digium D70 IP Phone Wall Mount Kit

Key Features: Mnfr. Part #: 1TELD004LF Spare or replacement handset for Digium D series IP phones Compatible with: Digium D40, D45, D50, and D70 IP phones

The Digium 1TELD007LF is a 5v power supply which is an optional accessory for Digium IP Phones. All Digium IP Phones are PoE but if you don't have a PoE switch...

Key Features: Mnfr. Part #: DURAFON-SIP-BU Additional long-range SIP cordless base station Up to 12 floors in-building penetration 250 000 sq. ft. of facility coverage 3 000 acres of property open...

Key Features: Mnfr. Part #: 2160-STAND Grandstream 2160 Replacement Stand for phone

Key Features: Mnfr. Part #: DP760 Up to 2 concurrent HD calls Extends an additional range of 300 meters outdoors and 50 meters indoors for added mobility Automatic or manual association...

The GXP2020EXT delivers additional functionality versatility and flexibility to Grandstream’s GXP2020/2010/2110/2120 enterprise IP phone series. It is the ideal solution for offices that manage high call volumes or an office receptionist....

Key Features: Mfr. Part #: GXP2200EXT Large 128x384 graphic LCD providing feature-rich graphics 20 programmable buttons per module 2 page switch keys which allows up to 40 extensions per extension module...

Wired Remote Control Unit for use with 5310 or 5310R IP Conference Unit, Silver. Sold Separately.

Wired Remote Control Unit for use with 5310 or 5310R IP Conference Unit, Dark Grey. Sold Separately.

Mitel Side Control Unit used to connect to Mitel 5310 IP Conference Unit to Mitel 5220 and 5224 IP phones. Compatibility: 5224 IP Phone 5235 IP Phone 5324 IP Phone 5330...

The Mitel 51303911 RFP 12 Single Cell Base Station acts as a DECT base station for the Mitel 112 DECT Phone. It provides IP DECT to SIP gateway functionality. It is...

The Mitel RFP 12 IP Repeater extends the range of the RFP 12 IP Single base station with a maximum of 3 RFP 12 IP Repeaters being connected in a daisy-chain...

Mitel 5330 IP Power Supply (Refurbished)

More Information: This is a non ROHS power supply for the Nortel i2001/i2002/i2004 Ip Phones. The IP Telephones by Nortel Networks require a power supply unless used with the power over...

Nortel BCM 48V Universal Splitter Key Features: For NTEX00, NTDU76, NTDU82 IP Phones meeting POE 802.3af standard Provides power over ethernet

Key Features: Mfr. Part #: 50006772 Mitel MiVoice 6900 Spare Handset Quantity: 25

The Mitel 5310 Conference Module Mouse is an add-on for the Mitel 5310 IP Conference Unit. Key Features: On/Off Mute Volume Up/Down Presentation Mode

Key Features: Mfr Part #: 68635 Connectivity: SIP/DECT GAP Voice Channels: 8 Switch Port: 1x 10/100/1000Base-T PoE: 802.3af Class 3 compliant Audio Codecs: G.711 G.722 G.729AB1 Echo Cancellation QoS supported outdoor...

Key Features: Mfr. Part #: 80E00006AAA-A IP-DECT Base Station Can handle 8 simultaneous calls Seamless roaming and handover Messaging alarm and interactive messaging Broadcast messaging On-air synchronization Connection to communications system...

Key Features: Mfr Part #: 80E00007AAA-A Connection to communications system via LAN DECT GAP/CAP radio interface Uses SIP protocol over IP Supports secure SIP over TLS and SRTP Plug-and-Play installation On-air...

Key Features: Mfr Part# T0000-68637016/68637 All 120 DECT channels supported for maximum use of the DECT capacity 8 simultaneous voice channels per RFP 4 additional channels for switching purposes GAP standard...

Key Features: Mfr. Part #: 730650-BASE Charging Base Compatibility: NEC ML440 IP DECT Wireless Phone Note: Charging Base Only.  Power not included **Power Supply NOT Included**

Delivering multiple new service revenue opportunities to cable operators. When Cable Operators think of ways to add high-margin service revenue voice services are usually the best answer. As the leading provider...

More Information: Mnfr. Part #: NTKC0229 Authorization Code for 1 IP telephony seat on your BCM 50 system

More Information: Mnfr. Part #: NTKC0231 4 IP Telephony Client Seats on the BCM50

BCM IP Telephony Client Seat Software Code enable's the use of IP sets on the BCM 50.

Nortel Networks BCM IP Telephony Client 16-Seat Software Code. More Information Mnfr. Part #: NTKC0049 Enables the use of 16 IP Sets on the Nortel Networks BCM 200 and 400

Nortel Networks BCM IP Telephony Client 1-Seat Software Code. More Information Mnfr. Part #: NTKC0046 Enables the use of 1 IP Set on the Nortel Networks BCM 200 and 400

Nortel Networks BCM IP Telephony Client 32-Seat Software Code. More Information Mnfr. Part #: NTKC0050 Enables the use of 32 IP Sets on the Nortel Networks BCM 200 and 400

Nortel Networks BCM IP Telephony Client 4-Seat Software Code. More Information Mnfr. Part #: NTKC0047 Enables the use of 4 IP Sets on the Nortel Networks BCM 200 and 400

Nortel Networks BCM IP Telephony Client 64-Seat Software Code. More Information: Mnfr. Part #: NTKC0051 Enables the use of 64 IP Sets on the Nortel Networks BCM 200 and 400

Nortel Networks BCM IP Telephony Client 8-Seat Software Code. More Information Mnfr. Part #: NTKC0048 Enables the use of 8 IP Sets on the Nortel Networks BCM 200 and 400

The IP Telephones by Nortel Networks require a power supply unless used with the power over Ethernet Switch. Local power via a Universal 100/240VAC 50/60Hz Power Adapter delivering 48VDC @ 0.52A...

The IP Telephones by Nortel Networks require a power supply unless used with the power over Ethernet Switch. More Information North American Version 110v

The IP Telephones by Nortel Networks require a power supply unless used with the power over Ethernet Switch. More Information International Version 220v

Key Features: Footstand Kit for IP Phone 1140E and 1120E RoHS Color: Charcoal Condition: New Part #: NTYS11AA70E6

Key Features: Nortel IP Phone 1100 English Text Key Cap Kit For IP 1120E / 1140E Series Condition: New Part #: NTYS15EAE6

Key Features: Nortel IP Phone 1100 Icon Key Cap Kit For IP 1120E / 1140E Series Condition: New Part #: NTYS15DAE6

Key Features: Nortel IP Phone 1200 Series Footstand Telephone footstand for Nortel IP Phone 1210 / IP Phone 1220 / IP Phone 1230 Part #: NTYS25AA70E6

The IP Telephones by Nortel Networks require a power supply unless used with the power over Ethernet Switch. Local power via a Universal 100/240VAC 50/60Hz Power Adapter delivering 48VDC @ 0.52A...

Key Features: Nortel IP Phone 1200 Series - English Text Keycap Kit for 1210/1220/1230 Models Includes Enterprise and SMB keys Removal of keycaps from the IP Phone requires a special tool...

Key Features: Mfr. Part #: VB-44399-G Panasonic Phone Base Stand for Panasonic DBS Phones Color: Grey Condition: Refurbished

Key Features: Mfr. Part #: 2200-11095-002 Headphones adapter Sub-mini phone stereo 2.5 mm RJ-9 Packaged Quantity: 5 Compatibility: SoundPoint IP 330/331 & 320/321 Phones Valid for use World Wide

Key Features: Mfr. Part #: 2200-15855-001 Expansion Microphone Kit for CX3000 and SoundStation Duo Includes two expansion mics and 2.1m (7ft) connection cables

Key Features: Mfr. Part #: 2200-17543-001 Combined Deskstand & Wallmount Compatibility: SPIP 320, SPIP 330, SPIP 321, SPIP 331 & SPIP 335 Single unit, Replacement Product

Key Features: Mfr. Part #: 2200-17569-001 24 Volt universal power supply NA power plug, US Compatibility: Soundpoint IP 330/320 , 430, 550 and Soundpoint 650 phones

Key Features: Mfr. Part #: 2200-17670-001 48 Volt universal power supply (NA power plug) For Soundpoint IP 670 IP 560 VVX 500 and VVX 1500 phones Used instead of 2200-17671-001 or...

Key Features: Mfr. Part #: 2200-48872-001 Polycom Universal Power Supply Output Voltage: 5 V Localization: North America Compatibility: Polycom VVX 150, VVX 250, VVX 350, VVX 450

Key Features: Mfr. Part #: 2200-17877-001 Polycom Power Supply for IP 321, IP 331, IP 335, and IP 450

Polycom 5150-47232-001 Soundpoint IP Productivity Suite License Improve the speed of business with a unique set of applications that turn the phone into an enhanced productivity tool. The Polycom Productivity Suite...

More Information: Polycom 5150-47573-001 Soundpoint IP Productivity Suite Site License (500 users) Polycom Productivity license for Soundpoint IP phones. Support for LDAP call recording multiple party conference and troubleshooting tools. License...