Adtran NetVanta T1/FT1+DSX-1 Network Interface Module

Adtran NetVanta T1/FT1+DSX-1 Network Interface Module

The NetVanta Series of internetworking products are designed for cost-effective Internet access, corporate Frame Relay, point-to-point connectivity, and Virtual Private Networking (VPN). Available in desktop and rackmount configurations, these modular platforms offer a complete turnkey solution for IP access routing and WAN connectivity. The T1/FT1 with DSX-1 NIM not only supports a full T1 or fractional T1 interface, but it also supports an additional DSX-1 interface. This DSX-1 interface is to drop-off voice traffic to a PBX.

T1/FT1 + DSX-1 Network Interface Module Key Features:

• Mnfr. Part#: 1202863L1
• Connector: RJ-48C
• T1 Line Rate: 1.544 Mbps
• FT1 Line Rate: DS0 Channelized (multiple of 64K)
• Line Code: AMI or B8ZS
• Framing: D4 (SF) or ESF
• Input Signal: 0 to -36 dB (DS-1)
• Line-Build-Out: 0, 7.5, 15, 22.5 dB, Auto
• Timing derived from WAN or internal
• DSX-1 Interface
  • DSX-1 Connector: RJ-48C
  • Line Interface: DSX-1 per ANSI T1.102
  • Line Rate: 1.544 Mbps
  • DS0 Assignment: Programmable
  • Robbed Bit Signaling
  • Line Codes: AMI, B8ZS
  • Line Length: -7.5 dB to 655 ft in 110 ft steps
  • Timing derived from WAN, internal or DSX-1